Preparation:
- Ensure proper isolation and moisture control.
- Prepare the tooth or restoration site according to standard dental procedures.
Dispensing:
- Load the Tokuyama Bulk Flow Syringe Refill into the dispensing instrument.
- Extrude the desired amount of material for the restoration.
Placement:
- Place the material in 4mm increments for efficient bulk filling.
- Adapt the material to the cavity walls for good cavity adaptation.
Light Curing:
- Cure the placed material using a suitable dental curing light.
- Follow the recommended curing time based on the light source's intensity (≥800mW/cm²).
Finishing and Polishing:
- Once cured, finish and polish the restoration to achieve the desired shape and surface smoothness.
- Utilize appropriate dental instruments for finishing procedures.
Check Shade Matching:
- Confirm the shade match of the restoration with adjacent teeth under appropriate lighting conditions.
Post-Curing Verification:
- Verify that the restoration has undergone adequate post-curing for optimal physical properties.
Cleaning:
- Clean the treated area, removing any excess material or debris.
Check Occlusion:
- Verify the occlusion to ensure proper biting alignment.
Patient Instructions:
- Provide post-operative care instructions to the patient, including any precautions or recommendations.