GC G-Premio Bond

• Zero debonding - High & durable bond to the tooth structure and indirect substrates thanks to 3 functional monomers

• Zero discolorations - Extremely thin film thickness (3µm) and strong bonding layer with high filler content

• Zero post-operative sensitivity - Dentin tubules are sealed in all etching modes

• Zero mistakes - Clear procedure and very low technique-sensitivity

• Zero hassle - One bottle for many uses & excellent handling with optimal wettability and long working time

• Zero waste - Short procedure & economical dispensing with 300 drops per bottle.

GC G-Premio BOND

G-Premio BOND is a universal, 8th generation bonding agent that is compatible with total-etch, self-etch and selective etch techniques providing excellent versatility. It is perfectly adapted to all direct restorations and can also be used to repair indirect restorations without the use of primer.

G-Premio BOND can also be used in combination with a silane when repairing glass or hybrid ceramic and is also ideal for hypersensitivity. It is available in a bottle (5 mL) with a new silicone cover to enable more precise drop dispensing.

Outstanding performance with all etching modes and in all clinical situations.

A unique combination of three functional monomers (4-MET, MDP and MDTP), notably excluding HEMA, ensures excellent stability and exceptional bond strengths not just to tooth tissue but to all indirect substrates, including composites, precious and non-precious metals, zirconia and alumina for all repair cases.

Benefits:

• Low pH (1.5) provides effective and consistent bonding
• Use in all total-etch, self-etch and selective etch bonding techniques
• Low film thickness (3 microns) enables use with resin cements to bond indirect restorations
• Universal (8th generation) bonding agent for use in direct and indirect procedures and treatment of hypersensitivity
• Up to 5 minutes working time
• Consistent bond strength with easy application
• Better dispensing control and less waste with new silicone bottle design.
• Fast technique (10 second placement and 25 seconds before placing composite)

Composition :

• Acetone
• Dimethacrylate
• Phosphoric acid ester monomer
• Dimethacrylate component
• Photoinitiator
• Butylated hydroxytoluene (BHT)

Light curing time (Halogen / LED (700-1200 mW/cm²) - 10 seconds (Distance from light guide tip<10 mm) and 20 seconds (Distance from light guide tip >10 mm)

Light curing time (High power LED more than 1200 mW/cm²) - 5 seconds (Distance from light guide tip<10 mm) and 10 seconds (Distance from light guide tip >10 mm)

• 1 x 5ml G-Premio bond bottle

• Leave undisturbed for 10 seconds after application.
• Dry thoroughly for 5 seconds under MAXIMUM air pressure and light cure for 10 seconds.
• For the selective etching approach, apply 35% – 40% phosphoric acid on enamel for 10 seconds prior to the application of the bonding.

Application Time:

• 30 seconds from application time to light-cure
• Bonding Layer Thickness: Less than 3 µM