Smooth mousse-like consistency - No resistance to closure, no rebound
High dimensional stability - No distortion
Less brittle - Easy to grind and cut
Saves time - Minimizes occlusal adjustments
JetBite enables dentists to achieve a simple and precise bite registration. The product offers excellent trimmability, enhancing efficiency in practice. Thanks to its natural consistency, patients feel comfortable, and handling becomes effortless. JetBite represents proven quality.
Smooth consistency - easy application without smudging
High dimensional stability - no distortion
Not brittle - easy to cut
Material type :
Type 1, high consistency
Polyvinylsiloxane, addition-type.
Colour :
Base: yellow
Catalyst: white
Mixing time (15 ml): 0:15 min
Total working time: 0:45 min
Oral setting time (35°C/95°F): 1:00 min
Storage:
Well sealed at temperatures 15–23°C/59–73°F and 50% relative air humidity. Bite registrations should be stored at normal room temperature, avoid exposure to heat and sun.
1 x 50ml Cartridges
6 x Mixing tips
1 x instruction manual
Apply the bite registration material directly onto the chewing surfaces of the lower teeth and gently guide the lower jaw into its natural bite position (centric occlusion).
Before taking it out, always check inside the mouth to make sure the material has completely hardened.
Keep in mind that heat makes the material set faster, while cold slows it down.
After taking impressions, check the models for any raised bubbles caused by air gaps.
Remove any such bubbles before using the bite registration to avoid improper fitting.
Once the material has hardened and is removed from the mouth, trim away any parts that touch the gums using a sharp knife. This helps avoid undercuts.
Proper trimming ensures the models won’t spring back or shift when placed together and allows you to visually confirm a correct fit.
The material can be used with either the “closed mouth” or “pre-bite” method.
Always guide the patient into the correct bite (centric position) before applying the JET BITE material.
